Week of February 1st - 8th

-Locations have been chosen to measure vibration data

• Elevator Shaft
• Comp Sci Classroom (directly under telescope location)

-Ready to collect data based on my calculated parameters.

• Data will be recorded at a period of 0.01 seconds (T = 0.01sec)
• Record at a rate of 100Hz - 50Hz
• Resolution of 0.0025 of a second

-Need to make a few more changes to the code based on these parameters.

For the following week I want to determine the best way to record data. I used the plotter in Arduino (attached screenshots to the post).